Jim, set the control in Plot to Kenwood, keying mode to FSK. Set the K3 for Data and sub-mode to FSK-D or PSK-D. Works like a champ.
73, Larry N8LP On 4/20/2011 12:00 PM, elecraft-requ...@mailman.qth.net wrote: > Message: 25 > Date: Wed, 20 Apr 2011 00:42:06 -0400 > From: Jim Stafford<w...@amsat.org> > Subject: [Elecraft] Trying to get LP-100 PLOT to make K3 output > carrier > To:elecraft@mailman.qth.net > Message-ID:<4dae641e.1000...@amsat.org> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Anyone done this. I did it a long time ago with an ICOM but have > never gotten the K3 to key. It changes the frequency and mode, etc > so I know the connection is good but I've tried DTR RTS and RTS DTR on > the PTT-KEY > option but to no avail. There is only a K2 method of interfacing between > rig and software so that may not be the best for the K3. > > I have also tried using the "Kenwood" interfacing to the rig. It appears to > key the K3, the red light comes on, but does not KEY the rig to get > output power. I can at that point during the 1 second intervals, key > the rig manually and get a data point for each and a plot for the band. > Just can't > get it to work all automatically. > > Thoughts? > > jim/w4qo ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html