Hi Alan, My original posting had two parts. I suspect you answered the question posed in the first paragraph. Do you have any comment on my findings in the second paragraph.
Here is the scenario. I have K3 macros set up for different CW splits. They turn on the Sub RX, copy parameters, turn on split a certain amount, etc.. To that, I wanted to add setting the P3 span an amount consistent with the split. So if I have K3 macros for splits of 1, 2, and 5KHz then I might want to set the P3 spans to 2, 4, and 10KHz respectively. 73, Mike K2MK Alan Bloom wrote: > > Yes, on the list. > > Alan N1AL >> >> >> >> On 4/24/2011 2:05 AM, Mike K2MK wrote: >> > I can actuate a P3 macro from within the P3 Utility. But I don't see a >> way to >> > attach the macro to one of the function keys. Is that coming? >> > >> > I added a P3 command to the tail end of an existing K3 macro using the >> K3 >> > Utility. It worked properly from within the K3 Utility. I then wrote >> that >> > macro to a K3 button but only the K3 portion of the macro worked. The >> P3 >> > command never found its way to the P3. I tried putting the P3 command >> at the >> > front end and the tail end of the macro. >> > >> > Any ideas? >> > >> > 73, >> > Mike K2MK > -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Macro-question-tp6300721p6303056.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html