Peter, I forget what the E000 error really means, but those kind of errors come from the option firmware. If you have a 'scope with a 10x probe, you can check for oscillation at the resonator pins (or U1 pins 13 and 14). Check your cable connections and your soldering for potential problems, and if you find none, ask pa...@elecraft.com for a replacement KAT2 firmware IC and a new resonator.
73, Don W3FPR On 5/2/2011 11:54 AM, Peter Wierach wrote: > Hi, > > I need some help. I just finished KAT2 and got a lot of problems. Befor > I explain, > I get the message E000 in the menu, what does it mean? > Is there a problem with the MCU? > > 73 Peter, DF8BB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html