Hi all, A&A Engineering's "QRP Smart Charger" has the option to be built using two of the four charging rates: 0.250 A, 0.500 A, 0.750 A, and 1.00 A. I plan to run my K2 using a KBT2 + Charger combo.
Which two charging rates would be suit this setup? My K2 has a number of options and draws about 380 mA right now on receive, considerably more when the remoted KPA100 goes into high power mode (remoted KPA100 obviously runs on a different power source). I've read W3FPR's Smart Charger Mod and he's using 250 mA, so I'm leaning towards the 250 mA/500 mA combo, however, I don't think his mod is used in conjunction with a remoted KPA100. 73 N5BCN - Brian ----- K2 #6800 KPA100/KAT100-2, KSB2, KAT2, KIO2, K160RX, KNB2, KAF2, LP-PAN/K2 w/ Pre-amp, SignaLink USB -- View this message in context: http://elecraft.365791.n2.nabble.com/A-A-Engineering-Charger-KBT2-tp6342835p6342835.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
