I was having trouble using my Junker straight key with my KX1. There would be an occasional stutter in the signal on contact release, and seemingly when contact made also. This key, and I dont know if true of all Junkers, has a coil in series with 'ground', and from ground to 'tip' is a 100 ohm resistor in series with a .1 uf capacitor. The problem remained when the coil was bypassed, but when the RC shunt was removed the problem was resolved.
I just thought I would put that out there in case someone has similar problems. Chip ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html