Well - probably not fixed, but I was able to find a workaround. If you haven't been following this thread, the basic issue is that the PA on my XV432 self oscillates. Thanks to everybody on the list, including Gary from Elecraft, I had several different things to try.
1) Make sure the paint on the inside of the case was removed in the appropriate spots (connectors, joints, etc.) 2) Add some vias near U6 and K2 3) Touch up the solder joints 4) Make sure the leads on the resistor specified in the XV432 mod was as short as possible 5) Change the PA Bias Adj 6) Add a pad in the TX path between the amp and XV432 7) Add a power resistor on a T connector at the XV432 output (or Amp input) Ultimately, I found that varying the length of the coax between the XV432 and Henry 2004A was the answer. I discovered this when I got to idea #7. First, I used a Bird Watt meter and adjusted the Henry amp to match my TS2000. (no reflected power) Then I reconnected the XV432. I added a 50ohm 20W dummy load on a BNC T at the output of the XV432 with a bunch of different adapters to make the N-BNC connection work. The XV432 was still connected to the Henry. This essentially put the dummy load in parallel with the Amp. The self oscillation stopped. So I removed the dummy load to prove the hypothesis and still no oscillation. Then I renewed my original track of varying the coax lengths and stumbled on a good length, which stopped the self oscillations. I know the length of cable changes the load. So it would seem the next step might be developing a simple matching network at the output of the XV432. But since I don't know all the variables (e.g. S parameters) this would probably need to be trial and error with some good guess work. Thanks to everybody on the list who helped out. Perhaps I'll see you in Dayton. 73's Stu2 W7IY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
