Just did the same procedure on my K3 (I have the sub-receiver installed in mine) and everything in the RF Gain calibration routine went normally and completed /wrote the value to eeprom for the main RX, but I got the "No response to DSP command" error when the utility was going through the sub-RX gain calibration procedure. I shut down and restarted everything. I ran through the cal procedures again but ignored the main rx and just did the sub-rx. This time it finished properly for the sub receiver. Leaving well enough alone, I didn't try to repeat the problem.
I'm running firmware versions uc 4.36, DSP 1 and 2 2.73 and FL 1.14. The only changes since I got the K3 (back in December of 2010) are firmware upgrades and I had originally had the general coverage bandpass filter installed in the sub receiver only. I have since moved that to the main receiver as I found it was more convenient in that position due to the way I like my audio configured. Jim - W0EB > Hi all, > > I'm hoping someone has come across this problem and can help out. > > I recently got an XG3, so thought I would run the Calibrate RF gain > utility > in K3 Utility. > > I'm running the latest K3 firmware and the most recent update of > the K3 > utility: 1.4.4.25 > > K3 and computer are communicating fine and Calibrate Tx gain > routine in K3 > Utility runs fine. > > Tried to run the Calibrate RF gain routine and I get the following > error in > the K3 utility window > "No reponse to DSP command" and the calibration progresses no > further. > On the K3 LCD there is this error message: "E 040FA6. ERR DSE" > > I've checked and all the setup parameters for the Calibrate RF gain > routine > are set correctly according the the on-screen prompts. > > What am I doing wrong? > > Thanks for any advice, > > John > VK7JB > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-Calibrate-RF-gain-with-K3- > utility-error-messages-help-tp6418790p6418790.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
