*FOUND THE PROBLEM.*During factory build the coax cable to the IF Out board from the main board has been trapped between the edge of the IF Out PCB and the metal side panel...... the gap is sufficiently small that it has crushed the coax and shorted it out....... Ho hum. I think it has happened because of also having the 2M module AND freq lock board. This adds extra cables in this point and they were assembled with slightly the wrong routing - I have moved them around now and just need a new cable to complete the job - this one works but intermittently. Thanks for the help and advice everyone.. 73 Roger-GW4WND
-- View this message in context: http://elecraft.365791.n2.nabble.com/P3-no-IF-display-tp6546250p6546726.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html