Thanks Jim I checked before the cables and apparently were good, but i've changed the one at RXOUT and it was not good ! Now its working fine.
Cu on 6m 73 Josep -----Mensaje original----- De: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] En nombre de Jim Brown Enviado el: viernes, 08 de julio de 2011 19:57 Para: elecraft@mailman.qth.net Asunto: Re: [Elecraft] connecting an external preamp for 6m On 7/8/2011 8:33 AM, ea3aky wrote: > 'm trying to connect a 6m preamp in RX ANT IN / OUT and can't get it > working, it's not receiving anything. My external preamp, an ARR GaSFET unit, is connected between RXOUT and RXIN. Connect RXOUT to the INPUT of the preamp, connect RXIN to the OUTPUT of the preamp. It will work with whichever antenna you have selected (that is, either ANT1 or ANT2). And, of course, make sure that your cables are good. 73, Jim K9YC. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
