Tom, I do not know whether the SignaLink is one of those that provide only mic level output, or if it is one that has provisions for Line level out.
In any case, it would appear that you are not getting enough audio drive level to the line-in jack of the K3. Can you drive the audio up to the required 4 to 5 bars indicated on the ALC meter? If not, there is not enough audio to the K3. Check the SignaLink documentation to see if there is a jumper that allows line level output. Most default to microphone level, and for line level, you need a signal 50 to 100 times greater than microphone level. 73, Don W3FPR On 7/11/2011 11:00 PM, n...@n5ge.com wrote: > I'm setting a SignaLink USB up on my K3 and am having trouble getting it to > transmit. > > The rig is keying and the TX LED is lighting but I'm getting no power out. > > I'm connected to the LI/LO and PTT on the rear of the rig. > > I'm receiving well in DATA A mode On Main Menu MIC SEL is set to Line In. > > Any one have a check list I can follow? > > 73, > Tom > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
