Title says most of what there is to say. I actually got the amp put together over the weekend but had to wait until tonight (Wednesday) to get it installed in the station and checked out. Everything works A-OK. I built my own K3 ACC cable using the DE9/DE15 connector shells supplied with my XV144 (I think -- they'd been hanging around a while) and found the jack screws were too long to make the connector cinch down to the KPA500 socket. I removed the screws and was good to go. Super fine QSK at any speed I can muster. With the amp in line, I've essentially got a 500+ Watt K3!
Just like the KPA500 I fooled with at Ham-Com in June, pushing the AUX band button activates my transceiver band and puts the station on 2 meters. The display says "1.8 MHz" but it does the right thing to pull in the XV144. Serendipity, I suppose. Now for a few spots and a few hours to make QSOs. This is going to be fun. 73... Randy, W8FN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html