Stan, That is correct. On the "strangeness", remember that the KRC2 was developed for the K2, and the DB-9 connector had all the pins that were needed.
73, Don W3FPR On 7/27/2011 5:36 PM, Stan Gibbs wrote: > Hi Don, > > Thanks for the response. > > If I read the KRC2 and XV144 manuals correctly, the way this would be set up > is to use the DB15/DB9 cable provided with the XV144 to connect the K3 to > the KRC2 "XCVR" DB9 connector and then use a DB9/DB9 straight-through cable > to connect the XV144 to the KRC2 "PC" port. Is that correct? > > It seems a bit strange that the KRC2 kit doesn't provide a DB15 connector as > well as a DB9 for making up the control cable. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html