I had 220 available so i started out with 110 and when confirmedall.was well i chopped off the pl ug from a heavy iec cord set and swiped the 220 plug from my TT hercules..
Wow this box is tiny.... Bill/ 3i Sent from myTouch 4G ----- Reply message ----- From: "Don Wilhelm" <w3...@embarqmail.com> To: "ke9uw" <c-haw...@illinois.edu> Cc: <elecraft@mailman.qth.net> Subject: [Elecraft] KPA500 on 240 VAC in the USA? Date: Thu, Jul 28, 2011 6:38 pm Chuck, The "do-it-yourself" solution is to purchase a plug that matches your socket, cut off the 115 volt plug and install the 230 volt plug. Those plugs are available at DIY and hardware stores as well as at electrical supply centers. 73, Don W3FPR On 7/28/2011 5:39 PM, ke9uw wrote: > Anybody using 240 VAC in the US? So it uses the same connector on the amp, > but you have to fit a different plug to mate with your 240VAC/20A wall > socket? Looks like this -! ...only without the dot. > Or better still, any droop using the 120VAC option? About 10 amps I guess. > Chuck, KE9UW > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
