Oddly enough I tried a different power supply and it was OK. Then I tried again the previous PS and it was OK. ?? I will check C44, however.
On 8/2/2011 2:41 PM, Don Wilhelm wrote: > Casey, > > That can happen if C44 fails shorted. Turn the KX1 on and measure the > voltage at the center of the BNC jack. If it is not zero, replace C44. > > 73, > Don W3FPR > > On 8/2/2011 1:34 PM, NA7U wrote: >> Is it normal for the KX1 to shut off if it sees a short across the BNC >> connector (no RF applied)? I'm trying to use a 4:1 Guanella balun (which >> looks like an electrical short) but the KX1 shuts off if it's in line. I >> tested this behavior by simply shorting the BNC, also. >> > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html