I have a recently obtained K2 with KAT2 module that I am trying to get up to speed. I'll have more questions and data later, but to start with I have a question about calibrating the SWR readings.
After going through the procedures in the manual, I find that the KAT2 under reads SWR. When the load is 50 ohms resistive, it shows 1:1. When SWR is higher, e.g. an almost purely resistive 7:1 (according to a Rig Expert AA-230) the KAT2 reads 4.5:1 I've calibrated forward power with a DL1 dummy load. Is there any problem adjusting R2 such that SWR on the KAT2 corresponds more closely to what the AA-230 reads? Chip AE5KA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
