Scott, Was that on a K2 or a K3? Please indicate in both the subject and the text.
Put a dummy load between the radio and the dummy load. Tune into the dummy load. After the TUNE completes, set the power to 40 or 50 watts and hold the key down for about 5 seconds. Tell us how much power is actually being developed. 73, Don W3FPR On 8/19/2011 12:31 AM, Scott Weiss wrote: > Hello to all, > Need some help. After finishing up on 80 cw last night I moved up to 20, > hit the auto tuner for the beam and received HI CUR. And this only ocurred on > 20 even with a Dummy Load attached. Msg seemed to go away once I reduced the > wattage down around 60 watts. Hepl!!! > 73's, > Scott N2WF > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
