Thanks to all of you on the reflector who took the time to provide information relating to the pre-set power levels between my K3 and KPA500. Tnx to Guy, W2AV for pointing out that the aux cable may not be seated properly in the Aux port or a potential bent pin. He was right!! I inspected the connection at the K3 and found one of the pins on the connector bent and not making proper contact. I straightened the pin and carefully made the connection to the K3. Now the pre-set power levels are functioning perfectly (nice touch Elecraft), and I am able to make band changes from either the K3 and KPA in concert. I'm a happy camper! Best 73 Len, K6LEN
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html