Thanks, Fred. I switched DIGOUT1 on while on 6m and it remembers to be on, only on 6m. My application will be to control an external relay that will enable INHIBIT for 6m-eme. As already mentioned, I use BAND0 for this on 2m and higher transverter bands, but I do not want INHIBIT for normal 6m use, only to sequence my TR relay and Harris 900w 6m PA, when using it. Applying RF drive without a load on the Harris can destroy the amp. One does not want to "hot-switch" the coax relay as 900w courses thru it! So you can add another use for DIGOUT!
I am getting close to "first smoke" with the 6m QRO. 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-? DUBUS Magazine USA Rep dubus...@gmail.com ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html