I'm trying to get my Icom IC-SM5 mic to work with the K3. I've setup the "FP:L Bias" on the K3 and there is 4.98 volts on Pin 1 of the K3 mic connector. No output from the rig at all (varied the pot on the bottom of the mic and the rig mic gain).
I would think that 5v should be sufficient for the SM5 mic. I tried putting in a 1k resistor from pin 6 (8v) to a 2.2uf cap, but then I just get feedback (full output) into a dummy load. Anyone have any ideas? Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Using-IC-SM5-Mic-tp6764918p6764918.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
