Hello, I have lost 80m receive on my K2 S/N:7012 intermittently again. For many days it was working fine, I even added the 160m module during this period and it was fine, yesterday morning when I turned on the rig, I had no 160,80,17 & 10m. Cycling through the bands did not bring them back. I moved the rig to the bench and took the top cover off. I checked the VCO voltages on R30 and found they were all within spec. I connected an antenna and found that yes, all bands were working again. (So much for checking the relays like I wanted to.) Taking the bottom cover off I spent a good couple hours looking for a bad connection but found none. I reassembled the rig and all day until it worked perfectly and when I went to bed it was fine. This morning, problem back. Again, cycling through the bands has no effect HOWEVER I found that power cycling the rig will often (temporarily) fix the issue. I believe when the bands come back they will not go away until the rig is shut off but will remain operational. The rig worked all afternoon and this evening, problem back. Power cycled 3 or 4 times and 80 was again working. I am thinking a sticky relay. It looks like the only relay common to all 4 bands is K13 but I need a sanity check before I change out that relay. Can anyone find any flaws in my logic or offer any advice on additional tests I can do? Thank you, 73 de Al, W2GZN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
