Jim, Sorry to disagree, but there is no way to set the COM Port on either the K3 nor the P3. Setting the baud rate - yes, but the computer (or the computer application software) determines which COM port is to be assigned to a particular connector or cable.
73, Don W3FPR On 11/2/2011 4:30 PM, Jim Dunstan wrote: > Generally the serial port is often but not always set as COM1. If you > attach a device to the serial port and it works right away ... then > they are both set to the same COM number. If the COM numbers are not > the same they will not communicate and you will have to change the > number either at the computer or the device/program. Communications > between computer and device using COM1 to COM1 is the same as COM3 to > COM3. Now if you swap computers/radios in your shack you will also > have to change the COM# on the radios (best place to make the change). > Jim, VE3CI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html