Hi Jack, See K3 manual page 44 under Automatic Antenna Control. Set CONFIG:AUTOINF to Auto 1
73, Mike K2MK Jack Berry wrote > > Cable from SteppIR is the S-13. I have the Y-cable as well but first just > trying > to get the SDA to track the radio. > The K3 has been working fine with DX-Lab logger and controller but not > worried > about that yet. > Tell me about AI, can't find that in the manual. > > Thanks! > > > From: "Joe Subich, W4TV" <lists@> > To: Jack Berry <jlberry@>; Elecraft Reflector > <elecraft@.qth> > Sent: Fri, November 25, 2011 3:33:09 PM > Subject: Re: [Elecraft] K3/SteppIR setup > > > Elecraft uses a modified Kenwood protocol. > Have you enabled AI mode in the K3 and is a logging program running? > What cable are you using to connect the K3 to SDA-100? > Is the SDA-100 "Auto" mode turned on? > > 73, > ... Joe, W4TV > > > On 11/25/2011 4:27 PM, Jack Berry wrote: >> Should the Orion or Kenwood mode be selected when using the K3 with >> SteppIR's >> SDA-100 controller? Can't get it to work with either mode, just thought I > would >> check with the list. >> >> Thanks! >> Jack - WE5ST > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-SteppIR-setup-tp7032430p7032454.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html