Dear Peter,
Your friend needs to make a Y-cable from the K3 to the Expert according to the Expert manual so the Expert can listen but not transmit via this cable. And remember the Expert is slow so you have to select the right communication speed. I do not remember exactly but I believe it is 19200. Best regards OZ1CCM Kjeld -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of DL2FI. Peter Sent: 28. november 2011 12:04 To: elecraft@mailman.qth.net Subject: [Elecraft] K3 together with P3 and EXPERT 1k possible? Good morning all I have seen some postings of EXPERT 1k users here on the reflector, I need your help. A friend has a K3 and a P3. Now he wants to connect his EXPERT PA to this combo. The problem: The K3 RS232 is occupied by the cable to P3, both P3 RS232 are occupied by Cables to k3 and PC. Because he wants to use the Expert with different Antennas on different bands, he wants the K3 to tell the EXPERT on which band it should work. But how? I personally have a K3/P3/KPA500, so I can´t try to find a solution. Thanks in advance Peter, DL2FI ______________________________________________________________ Elecraft mailing list Home: <http://mailman.qth.net/mailman/listinfo/elecraft> http://mailman.qth.net/mailman/listinfo/elecraft Help: <http://mailman.qth.net/mmfaq.htm> http://mailman.qth.net/mmfaq.htm Post: <mailto:Elecraft@mailman.qth.net> mailto:Elecraft@mailman.qth.net This list hosted by: <http://www.qsl.net> http://www.qsl.net Please help support this email list: <http://www.qsl.net/donate.html> http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
