Hello Nick, As you will take the trouble to open up the K3 front panel, I suggest you swap the entire DSP board for a peaceful mind. Luckily, my hearing is still very good up to 15Khz. To me, it is day and night difference after the swap. Judging from your serial no, there are quite a number of modification applicable to your K3. All these modifications are not difficult to be installed even for a non-radio man like myself.
TNX & 73, Johnny VR2XMC ________________________________ 從︰ Don Wilhelm <w3...@embarqmail.com> 收件人︰ Nick Thomas <njts...@gmail.com> 副本(CC)︰ elecraft@mailman.qth.net 傳送日期︰ 2011年12月5日 (週一) 10:20 PM 主題︰ Re: [Elecraft] K3 dsp board upgrade for early radio Nick, The little K3DSPLPF will take care of the high frequency part of the spectrum just the same as the DSP Board swap, BUT, it will not extend the low frequency response. So, the answer depends on what you want to accomplish - if you want both the high and low frequency changes in your K3, then the DSP Board swap is the easiest way to accomplish that. 73, Don W3FPR On 12/5/2011 9:04 AM, Nick Thomas wrote: > Hi Gents, > > I have an early K3 - serial # around 400. Do I need to swap the entire > DSP board out for a Rev D board or is the little mod kit *"K3DSPLPF" > *that is sold for $40 going to do it for me? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
