http://www.kl7uw.com/600m.htm scroll down the page half-way for the item marked March 17, 2011.
But mine is a downconverter for xmit. But no reason it could not be used for receive providing you place a good LF preamp ahead of the mixer (minicircuits SBL-1). In my case I am using my station 10-MHz reference oscillator as LO and running the K3 in test-mode at 10.470-10.510 MHz with output at 470-510 KHz. I LP fllter is needed on the output of the mixer circuit. I am using the downconverter to drive my converted NDB transmitter (100w output for 0 dBm input). 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-? DUBUS Magazine USA Rep dubus...@gmail.com ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html