Matt, Did you make a typo on that MD; command - if that is really what is being sent, that is a GET - it should be MD6; for normal sideband in data mode. The rest all looks correct, but there may be some subtle problem with the order in which the commands are sent.
The mystery deepens. 73, Don W3FPR On 1/1/2012 4:18 PM, Matt Zilmer wrote: > Hi Don, > > I've captured the commands sent to the K3 prior to TX on the assigned > frequency: > > FA0000FFFFfff; # FFFFfff is the correct carrier frequency. > FR0; > RT0; > XT0; > MD; > DT0; > > I'm still mystified, since the FA command is setting the correct cxr > frequency. > > It is also true that RMS Express uses frequencies with the center > frequency shown, however it compensates by subtracing off half the > channel width to set the carrier freq. > > Thanks and 73, > matt W6NIA > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html