Nidge, There is one link between 15 and 12 meters, and that is relay K6 which should be set on both bands. Those are latching relays, so you can set to the band, power down and check the continuity at the relay pins.
73, Don W3FPR On 1/12/2012 8:04 AM, Nigel (Nidge) Smith wrote: > > Hi All > > Once in a while I have an issue with my K2 on 15m and 12m in that > there is no receive and, according to the internal power metering, > next to no transmit. As I say this is intermittent. > > The radio is currently in it's QRP format with an internal battery fitted. > However this issue crops up even when the supply is external and the > KPA100 is installed. I could probably understand it if it was on 17m > and 15m or 12m and 10m as the bandpass filters and relays are shared > but, and maybe I haven't looked hard enough, I can't see the link between > 15m and 12m. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
