Well, might as weell tack on a couple of additional questions. 1. Is the delay between the keyline going down/up and the onset/loss of rf a settable value? E.g. can it be used with a keyed amplifier without an external sequencer.
2. Does it have its own set of values in the antenna tuner for each transverter (to make a good match to the tx input of the transverter). --Lenny W2BVH On 2/11/2012 5:20 PM, Wayne Burdick wrote: > On Feb 11, 2012, at 1:44 PM, JonKG6VDW wrote: > >> I am hoping that the KX3 >> will be as easy to interface as the K3 is especially around the >> software and >> frequency offsets. > It will. > > >> I know that the 2m KX3 transverter will be using the 6m >> band as an IF but the my 222 transverter I believe uses 10 meters so >> hoping >> that will still be supported. > Yes. > > >> As to the hardware side doesn't look like there will be separate >> input and >> output for the transverter like there is in the K3.. is that correct ? > You'll need to use the main antenna jack with external transverters. > Power level for transverters is set up in the menu, as on the K3. > > 73, > Wayne > N6KR > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
