Also check the Power Pole connectors to make sure the tabs are fully seated
into the plastic housing till it clicks.

Greg


On Sun, Feb 26, 2012 at 5:36 AM, Joel Black <joel.b.bl...@gmail.com> wrote:

> Ron,
>
> I didn't think to look at that last night, but I am testing it now into
> a dummy load at 50W.  I am using an MFJ-4125 with about 18" of #10 "zip
> cord."  This goes to a PowerPole DC distribution panel and there is
> another run of about 30" of #10 to the K3.  On receive, I have 13.4 -
> 13.5VDC (1.15 - 1.16A).  On transmit, it drops to 12.4 - 12.5VDC
> (~14.5A).  The wires are not even remotely warm.
>
> I do not have time to test with my Astron RS-35A at the moment, but I
> will when I get home this afternoon.  I also have an Astron RS-20A I can
> experiment with.
>
> Joel - W4JBB
>
> On 2/25/2012 5:55 PM, Ron W3ZV wrote:
> > Okay, confession time. My VFO B display area rarely displays anything
> but frequency. Doing the NAQP RTTY today, I had a brief attack of
> curiosity. Wanted to see how the PA temperature was doing. On the way I
> passed the voltage display and stopped for some reason. Noted that the
> voltage on RX was 13.6. Dropped to 12.6 with 75 watts RTTY TX. Supplied
> power cord to an Astron RS-35M. I am concerned that the drop may be
> excessive. I'd like to make sure that there is a problem before I start
> tearing into things. Cause for concern?
> >
> > Ron W3ZV
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to