Yes, but wouldn't that require having a serial connection to the KPA500 from MLDX - one that we don't currently have? We've already got one to the K3. I had hoped that, since the KPA500 already communicates, bi-directionally, with the K3, that they could be "changed" to (1) have the KPA500 send power level data to the K3, and (2) have the K3 report that, rather than it's own power. :-)
Jim / W6JHB On Wednesday, Feb 29, 2012, at Wednesday, 11:04 PM, Jack Brindle wrote: > Jim; > > The KPA does not send its output power information to the K3, so the K3 would > just be guessing. The measured output power _is_ available from the KPA500's > serial port, so it would be much better if MacLoggerDX were to get this > information directly from the amplifier. Make a request to the author to get > him to add KPA500 control to the program. I'll even volunteer to help Don if > he needs it (doubtful - he is good). > > Jack Brindle, W6FB > > > On Feb 29, 2012, at 10:17 PM, Jim Bennett wrote: > >> I use MacLoggerDX (MLDX) for QSO logging, among other tasks. It interfaces >> very nicely between my K3 and the MacBook Air laptop. The K3 passes a lot of >> data (including power output level) to MLDX and it winds up in my log. >> However, when I'm using the KPA500, the K3 only sends the driving power that >> it outputs to the amp. What I wind up with in my log is incorrect. For >> example, if the KPA500 is in OPERATE mode and I log a QSO, it'll get >> reported as a QSO made using 25 watts or power, instead of the 450 - 500 >> that the amp is putting out. Since the K3 and the KPA500 "speak the same >> language" and talk to each other, can the firmware be changed so that the K3 >> sends corrected Power Out level to the output data port when the KPA500 is >> engaged? As it is now, I have to go back into MLDX after every QRO contact >> and change the power field to reflect the actual power and not the K3's >> driving power. >> >> Regards, Jim / W6JHB >> Folsom, CA >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
