Sorry, "fat fingers" - the resistor value is 5.6k. You would have a very hard time finding a 5.5k resistor.
73, Don W3FPR On 3/3/2012 10:15 PM, Don Wilhelm wrote: > Gene, > > It is not clear, so I am going to make an assumption (you know what that > means) that pins 1. 2, 7 and 8 are jumpered straight across the mic > configuration header - AF to pin 1, PTT to pin 2, GND to pin 7 and GND > to pin 8. If that is true, all you need to add is a jumper from 5V to > pin 6 AND a 5.5k resistor between pins 6 and 1 on the back of the > microphone jack. > > Yes, there are other pins that could be connected - UP, DN, FUNC, but > there are no corresponding buttons on the MH2, so don;t bother > connecting them. > > The relevant information is in the KSB2 manual which you can download > from the Elecraft website. If you do not have the paper manuals, I > suggest that you download the manual for the K2 and the instructions for > all your installed options. Read through the alignment and operational > parts of each of them to familiarize yourself with your new K2. > > 73, > Don W3FPR > > On 3/3/2012 10:03 PM, Gene N4FZ wrote: >> I just bought a used K2 that needs to be wired for the Elecraft MH2 mic. >> Question: Do ALL the jumpers have to be soldered directly across, as per >> instructions with the mic? The P1 strip looks different, (has exposed long >> pins, that have pins 1, 2, 7, 8 jumpered and soldered), than the 2008 >> instruction sheet. It looks like pins 3,4,5 are unused. Any help is very >> much appreciated! Gene >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
