My K3/100 has developed an intermittent transmit fault. The power drops to a very low, but not zero, level at any power setting using either the LP or HP PA.
The symptoms/set up are as follows: Mode CW Using the KPA500 with it (not sure that is relevant) ATU not in circuit Power is low as displayed on the K3 and on the KPA500 In addition, and not related to the above fault (at least it doesn't seem to coincide with the low power output), the CMP & ALC metering display sometimes shows when the meter is set for SWR & Power. Any thoughts? Thanks Dave, G4AON ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
