Karl-Heinz,
You can still use the AUX connector to handle FSK-IN, Elecraft provides a Y
adapter
so you can connect both.
A happy user of the KPA500 and K3 using FSK
Gordon - N1MGO
On 30 Mar 2012 at 11:21, Karl-Heinz - DL2FAG wrote:
> Hello,
>
> I am planning to use a KPA500 together with the K3. I found some
> descriptions to connect both units togetehr with the KPAK3AUX-cable
> provided by elecraft.
> With the key line interrupter I am able to handle as well the SteppIR
> antenna.
> But now I recognized another problem. Actually I am using the
> AUX-connector to handle the FSK-IN signal on pin 1 (from a MK2).
>
> When I am using the KPAK3AUX-cable I am not able to use this further.
> Do I have to change completly to AFSK afterwards or does any other
> possibility available?
>
>
> --
> vy 73
> Karl-Heinz - DL2FAG
> mailto:dl2...@arcor.de
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
