microHAM "keyer" interfaces (CW Keyer, Digikeyer, DigiKeyer II, microKEYER, microKEYER II, and MK2R/MK2R+) as well as Station Master and Station Master Deluxe *do not support* firmware uploading in *any* transceiver.
It *may* be possible to upload to the K3 by setting Router's "Radio" option to "no radio (mode selected manually)" and powering the keyer from a dedicated supply. However, microHAM recommends using a true RS-232 port or KUSB and accepts no responsibility if the keyer is used for uploading firmware. I use RS-232 switches and a "real" serial port for updating all of my Elecraft equipment. 73, ... Joe Subich, W4TV microHAM America, LLC. http://www.microHAM-USA.com http://groups.yahoo.com/group/microHAM On 4/17/2012 8:35 AM, Jack Brabham wrote: > Joe, > > I am trying, unsuccessfully, to do a K3 download via my microKeyer 2. > I'm using a profile with everything off except the K3 that worked last > time I did one of these downloads a year or 2 ago. > > I get the usual K3 stuck in "MCU load" and the K3 utility cycling thru > various speeds trying to connect. > > Any suggestions? I'm running Win7 64 and do not have a serial port on my > PC. > > 73 Jack KZ5A > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html