I made my own Robert...simple to do. But I suspect a simple stereo Y-adapter will do with one male stereo and two female stereo (like a headphones splitter) will work too. Just wire the mic as mic+ to tip and mic- to sleeve. For the PTT use the PTT signal on the ring and PTT gnd on the sleeve (you would need to wire your PTT switch to a male 3.5mm stereo plug to do this).
Like I said...easier to just make your own adapter. :) 73 Greg On 4/18/12, va3...@gmail.com <va3...@gmail.com> wrote: > Does anyone know of a 'pigtail' to allow a foot pedal with a microphone > attached to a KX3. > > Now I have a K3 pigtail but they are not the same connection obviously > > > Just throwing this out > Robert > > a 'kosher' ham > Sent from my BlackBerry device > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html