Pete, I've been doing that to feed my SDR-IQ and it does not seem to be a sensitivity problem.
*NOTE* the RX Out/In loop is *after* the transmit lowpass filters and as such they will impact the ability of your QSR-1 to receive on bands above the one in use on the main receiver. 73, ... Joe, W4TV On 5/6/2012 8:24 AM, Pete Smith N4ZR wrote: > Any reason not to use a magic-tee splitter between the RX ANT OUT and RX > ANT IN ports on a K3 (no antenna tuner) to feed the received signals > simultaneously to a second receiver? I want to be able to use my main > antennas with my QS1R for Reverse Beacon functions. I realize that will > cost 3+ db on each port, but that doesn't look like a show-stopper. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html