Wayne,
I saw your below note on setting up a foot switch PTT via the ACC2 jack. As an alternative, and if I am not using the MH3, is there any problem to accomplish the same PTT function by building a jumper from a TRRS 3.5mm plug (into the MIC jack) to two mono in-line jacks where the pins of the plug are split into the two which support the mic (tip and sleeve) and those which support the PTT (ring 1 and ring 2)? I'm planning to use a Heil headphone/mic with a foot switch for home use. I, for one, am enjoying the exciting process of "birthing" the new KX3. 73, Jim Robbins N1JR "Robert, You can set up the ACC2 jack for use with a foot switch. Set MENU:ACC2 IO to LO=PTT, and connect your footswitch between ACC2 tip contact and ground. 73, Wayne N6KR" ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html