Curt, Behavior like that is almost always associated with a bad connection. Check the soldering at the tuning pot. If it is an older K1, there is a great possibility that the VFO pot could be worn enough to cause that behavior.
73, Don W3FPR On 6/22/2012 8:05 AM, Curt wrote: > My K1 has developed a glitch. Sometimes, while tuning, the displayed > frequency will suddenly jump down about 10-15 kHz, then return to the > correct frequency. I hear some static in the headphones at the same time. > The jump isn't caused by tapping the case, only moving the tuning knob. It > doesn't seem related to a specific "spot" on the pot. Without rotating the > tuning pot, there is no frequency instability at all. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html