Any thoughts on this one: Today I hooked up an antenna switch so I could run the K2/100 and the ICOM 706 and switch between them and use one or the other when I want to. Both radios run off the same Astron SS-25 power supply. When I have the 706 turned on and RX only, the KAT100 will not tune 40 or 80 meters. If I turn off the 706, the KAT100 works perfectly. It tunes all other bands with the 706 turned on. The 706 is only receiving so I wouldn't think it would be drawing enough current to effect the K2. Any ideas on this gremlin?
Jonathan Gottlieb WA3WDK K2/100 #4856 ____________________________________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this e-mail is confidential, may be legally privileged, and is intended only for the use of the party named above. If the reader of this is not the intended recipient, you are advised that any dissemination, distribution, or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately notify us by telephone and destroy this e-mail. ____________________________________________________________________________________________________________ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
