Gary, If I were you I'd call Elecraft support before sending the board. They may give you some tests to make to determine if you have the same problem as Dave.
73, Tom Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member On Sat, 7 Jul 2012 09:47:09 -0700, "Barry Garratt" <bgarr...@earthlink.net> wrote: >Hey Dave, > >I'll try that and report back but I'm getting the feeling it's going to back >to the factory. > >Regards, > >Barry KS7DX > > >-----Original Message----- >From: Dave Van Wallaghen [mailto:w8...@comcast.net] >Sent: Saturday, July 07, 2012 9:15 AM >To: Barry Garratt >Cc: elecraft@mailman.qth.net >Subject: Re: [Elecraft] KAT3 problem > >Hey Barry, > >If you are so inclined, you might try re-seating the LPA board. I did read a >couple of instances where that cleared up the problem. Although, it did not >clear mine up :-( > >Either way, it you wouldn't mind, please post back your findings. I'd be >interested to see if it was the LPA or not. > >Take care & 73, >Dave W8FGU > > > >On 7/7/2012 12:02 PM, Barry Garratt wrote: >> Hi Dave, >> >> Thanks for the info. It looks like mine will be heading back to the >> factory also. >> >> Have a great day. >> >> Barry KS7DX >> >> From: Dave Van Wallaghen [mailto:dvanwallag...@gmail.com] >> Sent: Saturday, July 07, 2012 5:36 AM >> To: Barry Garratt >> Cc: elecraft@mailman.qth.net >> Subject: Re: [Elecraft] KAT3 problem >> >> Barry, >> I just went through the same thing here. It turned out to that I had >> no output from my LPA board. It is currently at Elecraft being >> serviced. I have not heard from them yet as to the exact cause. It's >> only been in for a week or so. >> I used a scope to verify I had RF coming into the board and a logical >> high on the 7T line but no output. >> I found this trying to tune up as you did and saw the same two dashes >> on the display. >> Hope this helps. >> 73, >> Dave W8FGU >> On Jul 7, 2012 1:54 AM, "Barry Garratt" <bgarr...@earthlink.net> wrote: >> When I hit the ATU TUNE button this evening the tuner sounded like it >> was doing something but instead of the usual display of VSWR as it >> tuned there were only two dash lines. >> >> The problem is not band dependent. >> >> Anyone ever seen this before and if so what was the cure? >> >> Thanks. >> >> Barry KS7DX >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this email >> list: http://www.qsl.net/donate.html >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this email >> list: http://www.qsl.net/donate.html >> > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
