Note that SignalLink is also MONO!

...bc nr4c 

Sent from my Verizon Wireless Droid

-----Original message-----
From: Jim Rhodes <jimk...@gmail.com>
To: Jeff Herr <her...@comcast.net>
Cc: elecraft@mailman.qth.net
Sent: Mon, Aug 20, 2012 03:16:52 GMT+00:00
Subject: Re: [Elecraft] odds and ends...

Many (most?) laptop sound inputs are mono inputs and you need 2 channels
for IQ work. My old Gateway laptop switches depending on what is plugged
into it but my newer Samsung only does mono.

Jim K0XU Sent from my Xoom tablet
On Aug 19, 2012 9:53 PM, "Jeff Herr" <her...@comcast.net> wrote:

> Can someone explain why an external interface product, signalink, rig
> blaster, etc is needed between a kx3 and a laptop?
>
>
>
>
> -----Original Message-----
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KQ8M
> Sent: Sunday, August 19, 2012 7:12 PM
> To: d...@w3fpr.com; 'WB4JFI'
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] odds and ends...
>
> Not really following this thread but I must have some really bad cards  
from
> creative, asus and m-audio as my 96KHz cards only get 96Khz total, 48KHz
> either side of center and my 192KHz cards only get 192KHz total, 96KHz
> either side of center using my K3, LP-Pan and PowerSDR. Or with any of my
> SDR receivers and CWSkimmer. Or with any SDR receivers I build and test
> with
> Rocky, HDSDR, WinSDR etc. I know of no known low cost sound card that will
> provide 384KHz of total audio bandwidth.
>
> 73,
> Tim Herrick, KQ8M
> Charter Member North Coast Contesters
> k...@kq8m.com
>
> AR-Cluster V6 kq8m.no-ip.org
> User Ports: 23, 7373  with local skimmer, 7374 without local skimmer  
Server
> Ports: V6 3607, V4 Active 3605, V4 Passive 3606
>
>
> -----Original Message-----
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
> Sent: Sunday, August 19, 2012 9:54 PM
> To: WB4JFI
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] odds and ends...
>
> I don't know the advertized numbers, but Mr. Nyquist aside, there is a
> reason that two independent experts with panadapter displays (Joe Subich
> W4TV and Larry Phipps K8LP of LP-Pan fame) state that a soundcard with a
> 48 kHz rate will produce a 96 kHz span on the pan display.
>
> I do not doubt Nyquist, but I think the treatment of the numbers are a bit
> different (factor of 2)  Could it be due to the two channels? I really
> don't
> know the answers and do not have the energy to investigate such things
> anymore, I just choose to trust the experts who deal with this I/Q stuff  
on
> a daily basis.  I guess my scientific curiosity has declined with  
advancing
> years - it is no longer enjoyable to argue on the basis of observations  
vs.
> theory to sort out the differences - that was "fun mind games" many years
> ago. but today it is no longer a challenge.
>
> 73,
> Don W3FPR
>
> On 8/19/2012 5:45 PM, WB4JFI wrote:
> > Mr Nyquist would be happily surprised at that.  With I&Q samples at
> > 48kS/s each, you get a maximum of 48kHz, or one-half the total
> bandwidth.  Not 48k+48k.
> >
> > So, with a 48k sample rate, you will get plus and minus 24k from center.
> >
> > Sent from tfox iPad
> >
> > On Aug 19, 2012, at 4:33 PM, "Joe Subich, W4TV" <li...@subich.com>
> wrote:
> >
> >>> The sound card's maximum sampling rate will determine how wide your
> >>> panadapter display can be (in kHz); for example, a sound card
> >>> capable of sampling at 48 kHz can display slightly less than 48 kHz
> >>> of spectrum. If you want a wider display, you will have to ensure
> >>> that your sound card can sample at higher rates.
> >> A sound card capable of 48 KHz sample rate can display slightly less
> >> than 96 KHz.  With I/Q inputs and 48 KHz sampling you get +/- 48 KHz.
> >>
> >> 73,
> >>
> >>     ... Joe, W4TV
> >>
> >> On 8/19/2012 4:20 PM, Richard Ferch wrote:
> >>> Jeff,
> >>>
> >>> In addition to the cable, you will also need to be sure that your
> >>> laptop's sound card accepts stereo input. Panadapter software
> >>> requires stereo input (I and Q channels). Some laptop input jacks
> >>> will only accept mono signals, even though the laptop's sound card
> >>> itself is stereo. My newest laptop, for example, has a TRRS jack for
> >>> the sound card with a single input line, two stereo output lines, and
> ground.
> >>> I have no way to get stereo input into this sound card. An older
> >>> laptop I have has separate input and output jacks, but while the
> >>> output jack is stereo, the input jack is mono. If your laptop is
> >>> like either of these, your only recourse may be to get an external
> >>> USB sound card with stereo inputs.
> >>>
> >>> The sound card's maximum sampling rate will determine how wide your
> >>> panadapter display can be (in kHz); for example, a sound card
> >>> capable of sampling at 48 kHz can display slightly less than 48 kHz
> >>> of spectrum. If you want a wider display, you will have to ensure
> >>> that your sound card can sample at higher rates.
> >>>
> >>> Note that if you need to use an external (e.g. USB) sound card, it
> >>> may or may not have 3.5mm inputs. For example, I have one with dual
> >>> RCA phono jacks for its line inputs. With one of these cards, you
> >>> would need to go from 2.5mm stereo for the KX3's RX I/Q jack to two
> >>> separate RCA phono plugs for the sound card's input.
> >>>
> >>> I don't know whether Radio Shack has the specific cable you would
> >>> need, but I am sure that they have cables and adapters that could be
> >>> combined to achieve the desired result.
> >>>
> >>> 73,
> >>> Rich VE3KI
> >>>
> >>>
> >>> WW6L wrote:
> >>>
> >>>> Per the manual Iit looks like I would need one of these
> >>>>
> >>>> A cable with a 2.5 mm (3/32") plug on one end and a plug that
> >>>> matches your sound card input on the other end (typically 3.5 mm
> >>>> [1/8"] stereo) is required.
> >>>>
> >>>> If I want to see a panadapter display on my laptop.
> >>>>
> >>>> Where do I get it?
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft@mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net Please help support this
> >>> email list: http://www.qsl.net/donate.html
> >>>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net Please help support this
> >> email list: http://www.qsl.net/donate.html
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to