Joe... Good thought. Along the way to getting LP-Pan working, I had forgotten about the secondary CAT port in Router. I tried that, and as you said, it works fine. One small point is the need to load Router in the standard environment. Without it there's no control with NaP3. In that way, using my stated scheme is just slightly more handy but hardly enough to quibble over. Thanks for the heads up.
...robert On 9/1/2012 15:54, Joe Subich, W4TV wrote: > >> I am running mH Router + LP-Bridge + LP-PAN2 + NaP3 + N1MM + K3 + >> mAudio 2496, all with XP32 on a 2-core AMD 2.1Ghz machine that's a >> bit long in the tooth. > > Which microHAM interface are you using? With CW Keyer, Digikeyer, > Digikeyer II. microKEYER or microKEYER II you do not need LP-Bridge. > N1MM works with the primary CAT port and NaP3 can connect to the 2nd > CAT port. This avoids some of the critical timing, load order issues > and reduces load on the processor. > > 73, > > ... Joe, W4TV > > > On 9/1/2012 9:41 AM, Robert G. Strickland wrote: >> >> >> If you are >>> trying to run this on some old dog single or dual core setup with a 13 year >>> old OS like XP... well then good luck. >> >> I am running mH Router + LP-Bridge + LP-PAN2 + NaP3 + N1MM + K3 + mAudio >> 2496, all >> with XP32 on a 2-core AMD 2.1Ghz machine that's a bit long in the tooth. >> Getting all >> this going was a bit involved for sure. There are many parameters that need >> to be set >> just right, and the sequence of loading is somewhat critical. That aside, >> everything >> now runs flawlessly, and the pan display is super great. YMMV. >> >> ...robert >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Robert G. Strickland, PhD, ABPH - KE2WY rc...@verizon.net Syracuse, New York, USA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
