Andrew, Apparently your saved configuration contained the error too. You mention TX Gain and TX Bias in that order, I suggest that the TX Bias be done first because the bias will change the gain.
In fact, I would do all the calibrations in the order shown in the manual. 73, Don W3FPR On 9/5/2012 11:05 AM, Andrew Moore wrote: > After performing an EE INIT on the KX3 #797, per page 43 of the manual, I > understand you can avoid recalibration by restoring a saved config file via > the KX3 Utility. > > However, my KX3 is showing some odd behavior with the power level setting > (resets to 0.0 W upon changing ATU MD between auto/bypass) that appears to > be solved after an EE INIT, but comes back after reloading my saved config > file, so I'd like to simply do an EE INIT followed by a manual restore my > Menu settings to my liking (CW mode B, etc...) > > The manual states that if I don't restore from a saved config file, I need > to perform calibration. > > However, it appears that most calibration values have been preserved: REF > CAL, gain/phase for KXFL3, TXCRNUL, TXSBNUL, etc. > > I do notice that TX GAIN and TX BIAS have changed and that I'm not allowed > to enter those manually, but I can run the automated calibration. > > So am I correct in thinking that all I need to do after EE INIT is run the > TX GAIN and TX BIAS automated calibrations? Or are there dependencies I'm > not aware of that will invalidate other settings after doing gain/bias? > > Thanks, > --Andrew, NV1B > maineware.net > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html