Don, Thanks for indicating the right order of the pins, I had measured the wrong ones, rookie mistake I guess.
I just measured the voltage on J8 #7, #8 and #10, all have the same voltage, 5.2V. I guess that's good, yes? Mario Bouchard, Envoyé de mon iPad Sent from my iPad On 2012-10-04, at 19:28, Don Wilhelm <w3...@embarqmail.com> wrote: > Are you counting properly? Pins 7, 8, and 10 are connected together > according to the schematic. > The pins on one side are numbered 1, 3, 5, 7, etc. while the pins on the > other side are even numbers 2, 4, 6, 8, etc. > > 73, > Don W3FPR > > On 10/4/2012 6:03 PM, VA2AAE wrote: >> Don, >> >> Thanks for the reply, >> >> I checked on P3 #7 and #8, both have 5V, #10 has close to nothing (1.4mV) >> ??? >> >> I checked on J8 #7 and #8, both have 5V, #10 has close to nothing (1.4mV) >> ??? >> >> U9 #2 and #3 have 1.4mV, #6 has 6.5V has 13.6V. >> >> >> >> >> >> ----- >> Thanks, >> >> 73's >> >> Mario. >> -- >> View this message in context: >> http://elecraft.365791.n2.nabble.com/K2-no-audio-output-on-Part-I-Test-tp7563701p7563705.html >> Sent from the Elecraft mailing list archive at Nabble.com. >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
