Preamp, Attenuator, ATU, AGC were all checked before determining that the audio on 60m was lacking.
The levels on the P3 were also checked to aid in determining the problem. RX EQ was all maxed out in able to overcome the inherit audio attenuation when the EQ settings are moved off of +16. My guess is that it seems to be firmware related, and for now, the problem has been cleared out of the processors scratch pad memory, and may not show up again......... Thanks, David KD4NUE -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dale Boresz Sent: Sunday, October 28, 2012 2:11 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Receive Sensitivity Consistency David, Check your PRE and ATT setting on 60m compared to your other bands. I would guess that you have the ATT engaged on 60m and not on the other bands. 73, Dale WA8SRA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html