Scott, Be aware that there were 2 board designs. The first one can be seen on my website www.w3fpr.com. It has a small footprint, but the resistors and capacitors are mounted vertically.
After a couple folks laid all the capacitors and resistors out flat and mounted the board between the front panel and the Control Board (give Jack Brindle the first credit for that idea), Tom and I worked on an alternate layout that was larger in area, but had all components laying flat on the board (and eliminated the variable output level pot) - plus this newer board could be affixed to the Control Board with a screw and a couple nuts. This updated board layout is the one shown on Tom Hammond's (SK) website www.n0ss.net. Both are electrically equal, only the physical implementation is different. 73, Don W3FPR On 11/6/2012 5:03 PM, richardscott w wrote: > I have the parts to build the circuit designed by W3FPR. Before I put > it together on perfboard, I thought I would ask on this list if > anybody has an unused N0SS (FAR Circuits) PCB for this circuit that > they would be willing to sell? > If you do I would like to hear from you. > 73 > -Scott N3SW- > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html