On your K3, go into CONFIG:TUN PWR and set the tune power to 25 watts. The KAT500 takes about 20-25 watts to tune. Most of us had TUN PWR set at 5W or close for the KAT3, and have forgotten about the setting.
73, Fred K6DGW - Northern California Contest Club - CU in the 2013 Cal QSO Party 5-6 Oct 2013 - www.cqp.org On 11/16/2012 12:24 PM, Bob Woodward wrote: >> Here's the problem. When I push "tune" on the KAT500 the auto light >> continues to flash. No indication of SWR. When I push tune on the >> K3 it tunes - no indication on KAT500. I've put the tuner on the K3 >> into bypass. No change on KAT500 when I push tune on it. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html