On Tue, 12 Mar 2013 13:51:46 -0700 (PDT), Bill Wiehe wrote: > I believe the issue you describe is the same one I am in the process of > correcting in that the power connection for the fan would not seat properly. > I called Elecraft and spoke with a tech and we determined that the pins had > an over run of solder down into the channel blocking full seating of the > connector around the pins.
If I had been able to force the pins into the connector enough to go flush the way it should have been, the pins would have been sticking out of the connector along side the wires at the top! :o) Gary -- http://ag0n.net 3055: http://ag0n.net/irlp/3055 NodeOp Help Page: http://ag0n.net/irlp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html