K2 - KAT2- Every reading and function seems to be ok UNTIL page 17 – square five in
Bridge Null Adjustment (C55): After placing the K2 in CALn and exiting that setting by pressing MENU twice, I’m ready to put the K2 in TUNE mode: With the R1 and R2 set fully clockwise, and C55 positioned parallel to the rear panel edge and pressing TUNE I get: ”000 followed briefly by HI-cur + atu. Thereafter HI + atu disappears and 000 stays on. The adjustment of C55 does not affect the display at all.” +++ A further DMM-check of voltage on pin1 of U4 gives 0,00 volts, and still reads 0,00 volts in tune mode. (not the reading in the range of 3 to 4 volts, as advised ) Please advise, Hans, OZ5RB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
