Thanks for snappy reply to KAT2 troubles. Started on your presumption that connection to dummy load was unstable or non exsisting. It wasn't. Was about to take ATU apart for a rewinding of T1 but -- quickly decided to check the K2 in its original condition. Disconnected J7 and J8 + removed ATU from lid. Switching to original antenna plug and thus went back to K2's former condition with one exception : The new P6 plug was now sitting in its place, as it is hard to remove. Connected K2 to adjusted antenna and (ALAS !!) had the dreaded Hi-cur info on display. Resistance from collectors of Q7/Q8 to ground are both around 320 ohms . Thermal pads neatly intact. Shoulder washers in place. +++ Beginning to feel that the initiating ATU problems during CALn procedure was in fact a malfunction in the K2 itself. Where to look ? Any suggestions ?
73 de Hans , OZ5RB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
